ILSI America offers a broad line of clock oscillators which are Pb free and compliant with the RoHS directive 2002/95/EC. Our line of clock oscillators are available in both industry standard DIP and half DIP leaded packages, as well as, ultra small 4 pad SMD packages, such as 5x7, 3.2x5, 2.5x3.2 and 2.0x2.5 mm ceramic packages. Available output logic options include TTL, HCMOS, ECL, PECL, and LVDS. We offer clock oscillators at very competitive prices and some of the shortest lead times in the industry. Applications including modems, phase locked loops, signal tracking, automotive, medical instrumentation, and communications equipment use our clock oscillators.

If you are in need of Raltron oscillators, ILSI America has equivalent oscillators that match the available frequencies, voltage levels and package types. Today, we offer frequency control solutions that meet and exceed the performance of Raltron oscillators in terms of price, quality, applications engineering, and customer support. Our oscillator products are manufactured in ISO 9001 certified Asian factories that operate under ILSI's Factory Control System. Custom Raltron oscillators including clock oscillators, VCXO, TCXO, TCVCXO, and OCXO can be designed to meet customer specifications for a wide spectrum of electrical and environmental requirements. Please contact us at (775) 851-8880, with your specific requirements for Raltron oscillators.

ILSI America offers equivalent products to SaRonix oscillators and other SaRonix frequency control products including quartz crystals, VCXO, and TCXO. Our oscillators match SaRonix oscillators in available frequencies, voltage levels, and package types. ILSI's oscillator are manufactured in ISO 9001 certified Asian factories that operate under our Factory Control System. ILSI America offers oscillators at better price and delivery than SaRonix oscillators, while meeting and exceeding customer expectations for quality, application engineering, and customer support. For applications requiring very tight tolerances and miniature packages that call for SaRonix oscillators, contact ILSI at (775) 851-8880 for an equivalent part.

A TCXO (temperature compensated crystal oscillator) is a crystal oscillator with a temperature compensated network that consists of at least two thermistors and a temperature variable resistors. The temperature coefficient and values of thermistors are used to provide a control voltage that compensates the change in TCXO frequency over temperature. Temperature compensation can be achieved with or without use of a varactor, however this technique is harder to accomplish because exact resistors values are needed to compensate for the frequency change over temperature. Digital TCXO can also be used to correct frequency shift. For more information on our TCXO products contact us at (775) 851-8880.

A VCXO is a voltage controlled crystal oscillator that generally operates at the fundamental frequency of its internal crystal. A VCXO has a voltage variable varactor attached in series with the crystal. By varying the control voltage, the capacitance of the varactor changes, causing the frequency to change. The VCXO crystal is a high-Q quartz device that enables the circuit to achieve low phase jitter performance over a wide operating temperature range. Available packaging includes industry standard DIP and half DIP leaded packages, as well as, surface mount 5x7 and 9x14 mm ceramic packages for our VCXO oscillators.

ILSI America offers a line of crystal oscillators that includes the following types: XO, VCXO TCXO, TCVCXO, and OCXO. Many of these crystal oscillators offer tri-state control. The three state output or tri-state controlled crystal oscillators are common in applications that include automated testing and bus writing data transfer. The three states are low, high and high impedance. An output in the high impedance state behaves as if it is disconnected from the circuit except for possibility of a small leakage current. Please contact us at (775) 851-8880, for more information on crystal oscillators that are best suited for your application.

Our primary business is development and supply of frequency control products. Most of these frequency control products are quartz crystal based and include clock oscillators, VCXO, TCXO, TCVCXO and OCXO products, as well as quartz crystals in a variety of package types. We offer both surface mounted and leaded devices, including crystals and oscillators with tight tolerances and miniature packages, and crystal filters. Other frequency control products that are not based on quartz crystals include ceramic resonators and filters. Our Asian factories operate under ILSI's Factory Control Systems and are ISO 9001 certified. We are a recommended supplier for Chip Sets manufactured by Conexant, Alcatel, ST Micro, Motorola, and Hitachi and our frequency control products are very competitively priced.

Crystal oscillators are units where the primary frequency determining element is a quartz crystal. When a crystal is placed into an amplifier circuit, a small amount of energy or voltage is fed back into the crystal, which causes it to vibrate. The inherent high Q characteristic of quartz crystals enables the crystal oscillators to maintain high frequency accuracy and stability over temperature. Since the frequency-temperature characteristic of the quartz crystal is predictable, temperature compensation may be applied to crystal oscillators to further improve their thermal stability. Specific output logics, such as TTL, HCMOS, ECL, PECL, LVDS, Sine, or Clipped-Sine are available on oscillators from ILSI America.

A clock oscillator is used in digital circuitry to provide a time base, or reference for synchronizing the switching rate of the digital circuit. The clock oscillator products from ILSI America are available in a variety of packages including metal, plastic, and ceramic surface mount devices, ranging in size from 9x14 to 2.0x2.5 mm. Our clock oscillator can be specified with supply voltages that range from 1.8 to +5V and frequencies that range from 1 to 750 MHz. We at ILSI America are here to assist you in finding the right clock oscillator product, please contact us at (775) 851-8880.

ILSI America offers crystals matching Raltron crystals in price and performance, including both industry standards HC49US, HC49USM leaded devices, as well as, ultra small surface mount ceramic packages, both 2 pad and 4 pad designs. Our crystals are also equivalent to the Pb free Raltron crystals. We achieve price parity by manufacturing our quartz crystals on high volume lines in our China facilities, which are certified to ISO 9002 standards. We also can design crystals to meet custom specifications of Raltron crystals for either the fundamental or overtone resonant modes. In addition to Raltron crystals, we have Raltron equivalent oscillators and ceramic resonators.